E-Revo 1/16 - Adjustble Pushrods Guide

Ursäkta Engelskan, ja orkade helt enkelt översätta, just nu

Adjustble pushrods for the E-Revo VXL 1/16

By Thomas Pettersson

To this date i have been using ball-ends and hollow balls for the Stampede, they are trimemd to fit and working ok. To bad when the car compress they bind when the car flatsot...somthing like a swaybar...

I stoped by the LTD (local traxxas delaer) and did find some real nice stuff.

Parts that will be needed.

-DU-BRO Ballends/swivels #369 2/56 - 4/40
-Short AE turnbuckles 45mm (im using FT)
-Longer AE Turnbuckles 51mm (same as above)
-Drill 3mm
-Drill 2.5mm
-Plier protect the "mouth" with some tape

Parts:



Take out the ball, use the 2.5mm drill to get bigger hole



The little washer that follow must be drilled to, they are used @ the rockers



You have to drill app 6mm in the ball"stud" when you use short turnbuckle for pushrod so you can screw them together tight. Use the 3mm drill




When this is done, all you have to do is mount everything on the car..



As you can see @ the rockerarm i am using the little washer, it must be mounted on "top", it is tight, litle force but it will work.

FRONT



REAR TOE LINK (same as steering)