Team Bluegroove BG4 190mm converison | Done

USA/UK

So my car is finished, and i am pretty pleased with it, it is my first Airbrushed lid ever...The kit is wounderfull
------------

SWE

Så e bile nklar..äntligen...Min första Airbrush lackade kaross nånsin, vart lite små nöjd.










SETUP. Team Bluegroove BG4 / 190mm | 1/18

+Front+

Shocks: Alu
Shock Oils: 700w
Pistons: 2
Spring: Silver hard
Preload: 2mm
Internal Droop Spacers: 0mm

Shock Angles: (alu tower,arms just under level)
Shock angle bottom arms: Outer
Shock angle top tower: Middle

Toe In/Out: 1in

Swaybars:
Sway Bars: On
Sway Bar MM thickness: 1.6mm

Tires: Foam
Compound/Type: Trinity
Dimensions: 55mm/21mm
Traction compound: Carpetjack
CA:

Micell: front diff hard



+Rear+

Shocks: Alu
Shock Oils: 600w
Pistons: 2
Spring: Black medium
Preload: 6mm
Internal Droop Spacers: 0mm

Shock Angles: (Alu tower)
Shock angle bottom arms: Outer
Shock angle top arms: 3rd from top

Toe In: 1 in

Swaybars: Yes
Sway Bars: On
Sway Bar MM thickness: 1.4

Tires: Foam
Compound/Type: Trinity hard
Dimensions: 55mm/21mm
Traction compound:Carpetjack
CA: None

Micell:


+Chassis+

Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left with battery
Micell: Xray M18T Pro With Team Bluegroove BG4 kit


+Electronics+
Motor:Novak 380 Sensor 8.5T
Gearing:54/14
Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using Team BlueGroove BG4 Kit